FIRE ALARM - FIRE ALARM SYSTEMS

XFP NETWORK CARD FOR 16 ZONE PANELS

XFP Network card for 16 zone panels (1 for each plant in the network)

XFP NETWORK CARD FOR 32 ZONE PANELS

XFP Network card for 32 zone panels (1 for each plant in the network)

ZFP ADDRESSABLE CONTROL PANEL WITH TOUCH DISPLAY 4,6 AND 8 LOOPS

The control panels of this series have multiple functions and touch screen display. They are compatible with Apollo XP95/Discovery protocols. Off-the-shelf configurations are available, but it is possible to configure your own panel using the available ZFP modules of your choice. The control panels in this series have a fast self-learning system, flexible settings and powerful diagnostics. The high reliability RS485 networking option allows up to 128 networked devices (64 main and 64 repeater panels). The programming software has an intuitive interface and is very convenient to program. Graphical system visualization software is also available for this series.

ZFP REPEATER PANEL

The ZFP series repeater panels are supplied with a touchscreen display and an integrated network card. An additional power supply is required (BF360-24 1A 24V PSU). They are available in two versions for surface and flush mounting. Provide full level 2 access (muting, disabling, resetting, etc.). A maximum of 64 compact controllers can be connected to a single ZFP network.

 ​

ZFP EXPANSION MODULE WITH 16 INPUTS/OUTPUTS

Expansion module designed to enhance the functionality of ZFP control panels;

• Provided by 8 controlled inputs/outputs open type collector (depending on the wiring configuration);
• Programmable via PC;
• Power and separate input/output LED indicators;
• Мax. of 15 A-BUS expansion boards can be connected to one ZFP panel, via the RS485 A-BUS network;
• It is usually installed in the control panel. It can also work at a distance of up to 1 kilometer. 
  

Z13 EXPANSION MODULE WITH 8 INPUTS/OUTPUTS

8 I/O expansion relay board designed to enhance the functionality of ZFP addressable control panels;

• 8 x 1A 30V single pole contacts;
• Programmable via PC;
• Power and separate LED indicators for activated relay;
• 15 A-BUS expansion boards can be connected to a ZFP panel via the RS485 A-BUS network;
• Usually is installed in the control panel. Can can operate at a distance of up to 1 km
•  Provides 8 controlled open collector inputs/outputs (depending on wiring configuration used));
• Programmable via PC;
• Power and separate input/output LED indicators;
• Up to 15 A-BUS expansion boards can be connected to a single ZFP panel via the RS485 A-BUS network;
• It is usually installed in the control panel. It can also work at a distance of up to 1 kilometer. 
  

Z12 EXPANSION MODULE WITH 8 RELAYS

Expansion relay board with 8 relays designed to enhance the functionality of ZFP addressable control panels;

• 8 x 1A 30V single pole contacts;
• Programmable via PC;
• Power and separate LED indicators for activated relay;
• To 15 A-BUS extension boards can be connected to a ZFP panel via the RS485 A-BUS network;
• Usually is installed in the control panel. Can can operate at a distance of up to 1 km

ZFP EXPANSION MODULE WITH 4 RELAYS

Expansion relay board with 4 relays designed to enhance the functionality of ZFP addressable control panels

• 4 x 1A 30V single-pole contacts
• Programmable via PC;
• Power and separate LED indicators for activated relay;
• A maximum of 15 A-BUS expansion boards can be connected to a ZFP panel via the RS485 A-BUS network;
• Usually is installed in the control panel. Can can operate at a distance of up to 1 km

APOLLO  55000-665IMC ADDRESSABLE OPTICAL SMOKE SENSOR

Addressable smoke sensor, addressed by means of a DIL switch

• Fully compatible with XFP & ZFP XP95/Discovery addressable fire panels;
• Works on the principle of light scattering;
• Suitable for installation in rooms where a slow burning and smouldering fire may occur;
• Suitable for bedrooms and evacuation routes, hotels, offices, etc.;
• The red LED lights when the detector is in alarm;
• Certified to EN54-7 by LPCB;
• Requires 45681-200IMC standard base or 45681-504IMC relay base

APOLLO 5500-465IMC ADDRESSABLE TEMPERATURE SENSOR 

Addressable temperature sensor standard temperature, addressed by means of a DIL switch

• Fully compatible with XFP & ZFP XP95/Discovery addressable fire panels;
• High quality heat detector type A2S (55°C)
• Monitors room temperature using a single thermistor that provides a voltage output proportional to the outside air temperature;
• Suitable for places where flames with high heat output can break out;​
•  The red LED lights when the detector is in alarm;
• Certified to EN54-7 by LPCB;
• Requires Standard Base 45681-200IMC or 45681-504IMC relay base

APOLLO 55000-720  ISOLATOR FOR ADDRESSABLE SYSTEMS

Isolator for addressable systems ( requires 45681-211)

The insulator is placed at intervals along the circuit and ensures that in the event of a short circuit, only the two-insulator section will be affected. When the short circuit on the circuit is removed, the isolators automatically restore power and data to the isolated section.

APOLLO 5500-475IM  ADDRESSABLE TEMPERATURE SENSOR

Temperature addressable sensor standard temperature, addressable via DIL switch

• Fully compatible with XFP & ZFP XP95/Discovery addressable fire panels;
• High quality heat detector type CS (90°C)
• Monitors room temperature using a single thermistor;
• Suitable for places where flames with high heat output can break out;
• The red LED lights when the detector is in alarm;
• Certified to EN54-7 by LPCB;
• Requires 45681-200IMC standard base or 45681-504IMC relay base

APOLLO 45681-505IMC    

Insulating base for APOLLO Dil Switch sensors

APOLLO  45681-211 

InsulatIing base APOLLO XPC95 series

APOLLO  45681-321IMC

Insulating base for APOLLO XP95 series

APOLLO  45681-210IMC 

Standard base for APOLLO XP95 series sensors

APOLLO 5500-885IMC 

MULTISENSOR ADDRESSABLE DETECTOR

Multisensor addressable optical smoke and thermal sensor APOLLO XP95

• Fully compatible with XFP & ZFP XP95/Discovery addressable fire panels;
• Optical smoke sensor and temperature sensor with A1R thermistor;
• Responds to a wide range of fires;
• Many suitable for installation in hotel rooms;
• The red LED lights when the detector is in alarm;
• Certified to EN54-7 by LPCB;
• Requires standard base 45681-210IMC

APOLLO 5500-600IMC 

ADDRESSABLE OPTICAL SMOKE DETECTOR

Optical smoke addressable Apollo XP95 detector

• Fully compatible with XFP & ZFP XP95/Discovery addressable fire panels;
• Works on the principle of light scattering;
• Suitable for installation in rooms where a slow burning and smouldering fire may occur;
• Suitable for bedrooms and evacuation routes, hotels, offices, etc.;
• The red LED lights when the detector is in alarm;
• Certified to EN54-7 by LPCB;
• Requires standard base 45681-210IMC

APOLLO 5500-401IMC TEMPERATURE ADDRESSABLE DETECTOR

High temperature addressable detector

• Fully compatible with XFP & ZFP XP95 / Discovery addressable fire panels;
• Heat detector type CS (90°C)
• It monitors the temperature in the room using a thermistor;
• Suitable for places where flames with high heat output can break out;
• EN54-7 certified by LPCB;
• Requires standard base 45681-210IMC

APOLLO 5500-400IMC 

TEMPERATURE ADDRESSABLE fire detector 

Standard temperature addressable detector

• Fully compatible with XFP & ZFP XP95/Discovery addressable fire panels;
• Heat detector type A2S (55°C)
• Monitors room temperature using a single thermistor that provides a voltage output proportional to the outside air temperature;
• Suitable for places where flames with high heat output can break out;
• Certified to EN54-7 by LPCB;
• Requires Standard base 45681-210IMC

APOLLO SA5900-908IMC

Addressable manual call point Apollo XPC95 series

• Fully compatible with XFP & ZFP XP95/Discovery addressable fire panels;
• Built-in isolator for 20 devices;
• Resetable;
• Certified-EN 54-11 EN 54-17

APOLLO 58200-951IMC   

Addressable manual call point Apollo XPC95 series за външен монтаж IP67

• Fully compatible with XFP & ZFP XP95/Discovery addressable fire panels;
• Built-in isolator for up to 20 devices;
• Resetable
• Certified-EN 54-11 EN 54-17

APOLLO 55100-940 

Addressable manual call point Apollo XPC95 IS series.

• The intrinsically safe (IS) manual call buttons are the successor to the well-known and established XP95 series;
• The XP95 I.S MCP have all the benefits of the standard range but have been developed specifically for use in hazardous areas;
• Resetable;
• ​Certified-EN54-11:2001

APOLLO 55000-960  

Addressable manual call point Apollo XPC95 IS series MEDC for use in flammable and heavy environmental conditions

• The XP95 I.S manual buttons have all the benefits of the standard range, but have been specially developed for use in flammable environments and harsh environmental conditions;
• Designed for use in flammable environments and harsh environmental conditions;
• The GRP hull is suitable for use in marine or coastal areas where light weight combined with a high degree of corrosion resistance is required;
• Use in Zone 0, Zone 1 and Zone 2
• Exed, Exia or weatherproof;
• Approved by ATEX Ex II 1GD (Exia);
• Certified BASEEFA;
• Corrosion resistant red painted GRP;
• Additional protection cap (optional);
• Protection against explosion: ATEX Ex II 1GD, Ex ia IIC T4 Ga, Ex ia IIIC T135 ° C Da ATEX Ex II 2GD, Ex d e (mb) IIC T6 (T4), Ex tb IIIC T85 ° C (T135 ° C) Db;
• Activate is activated after breaking the glass

BF450A/CX/SR ADDRESSABLE SIREN FOR CEILING MOUNTING

Addressable siren for ceiling mounting, red

• Certified to EN54-3 (sirens) and 17 (isolators) by Intertek;
• Impressive sound of 91 dB(A) @ 1m;
• Built-in short-circuit isolator;
• Group addressing allows simultaneous management of multiple devices;
• 7 selectable sound levels and 15 selectable tones;
• IP21C

BF451A/CX/SR  ADDRESSABLE SIREN WITH BEACON

Addressable siren for ceiling mounting, red with
3W beacon​

• Certified to EN54-3 (sirens) EN54-23 (VADs) and 17 (isolators) by Intertek;
• 91 dB (A) @ 1m;
• Built in insulator;
• 7 selectable volume levels and 15 selectable tones;
• Provides light distribution (W-3-3.1) when wall mounted min. 0.4 lux over 3 x 8 m cylindrical area;
• for ceiling mounting (C-3-8) light distribution min. 0,4 lux over 3 x 3,1 m;
• IP21C

BF430A/CX/SR  ADDRESSABLE SIREN FOR INDOOR INSTALLATION

Addressable siren for indoor installation

• Certified to EN54-3 (sirens) and 17 (insulators) by LPCB;
• Impressive sound of 103 dB (A) @ 1m;
• Built-in short-circuit isolator;
• Group addressing allows simultaneous management of multiple devices;
• 7 selectable sound levels and 15 selectable tones;
• IP21C

  BF430A/CX/DR65 ADDRESSABLE SIREN FOR OUTDOOR INSTALLATION

Addressable siren for indoor installation

• Certified to EN54-3 (sirens) and 17 (insulators) by LPCB;
• Impressive sound of 103 dB (A) @ 1m;
• Built-in short-circuit isolator;
• Group addressing allows simultaneous management of multiple devices;
• 7 selectable sound levels and 15 selectable tones;
• IP65

BF433A/CX/SR 

ADDRESSABLE SIREN WITH BEACON FOR INDOOR INSTALLATION  

Addressable siren for indoor installation, red with 3W beacon

• Certified to EN54-3 (sirens) EN54-23 (VADs) and 17 (isolators) by LPCB;
• Impressive sound of 103 dB(A) @ 1m;
• Embedded short circuit isolator;
• Group addressing allows simultaneous management of multiple devices;
• 7 selectable volume levels and 15 selectable tones;
• Provides light distribution (W-2.4-8.2 min. 0.4 lux over a 2.4 x 8 m cubic area;
• IP21C

BF433A/CX/DR65 ADDRESSABLE SIREN WITH BEACON FOR OUTDOOR INSTALLATION

Indoor addressable siren, red with 3W beacon

• Certified to EN54-3 (sirens), EN54-23 (VADs) and 17 (isolators) by LPCB;
• 103 dB (A) @ 1m;
• Embedded short circuit isolator;
• The group addresser allows for simultaneous control of multiple devices;
• 7 selectable sound levels and 15 selectable tones;
• Provides light distribution (W-2.4-8.2 min. 0.4 lux over a 2.4 x 8 m cubic area;
• P65

BF431A/CX/W  ADDRESSABLE BASE WITH SIREN AND ISOLATOR

Addressable base with siren and isolator, compatible with Dil Switch & Xpert Card detectors

• Certified to EN54-3 (sirens) and 17 (isolators) by LPCB;
• Impressive sound of 96 dB(A) @ 1m;
• Embedded short circuit isolator;
• Group addressing allows simultaneous management of multiple devices;
• 7 selectable sound levels and 15 selectable tones;
• IP21C
• Доставя се с платка за бързо свързване BF431QCP
• Option BF330CTLIDW white or BF330CTLIDR red decorative cap when used without detector.

BF456A/CX/W  ADDRESSABLE BASE WITH SIREN AND BEACON

Addressable base with siren, beacon and isolator, compatible with Dill Switch & Xpert Card detectors

• Certified to EN54-3 (sirens) EN54-23 (VADs) and 17 (isolators) by LPCB;
• Impressive sound of 96 dB(A) @ 1m;
• Embedded short circuit isolator;
• Group addressing allows simultaneous management of multiple devices;
• 7 selectable sound levels and 15 selectable tones;
• For ceiling mounting (C-3-8) light distribution min. 0,4 lux over 3 x 3,1 m
• Доставя се с платка за бързо свързване BF431QCP
• IP21

SA4700-100

INTELLIGENT SWITCH MONITOR MODULE WITH BUILT-IN ISOLATOR

The intelligent controller is designed to monitor the status of one or more single-pole contacts connected by a pair of wires and report their status to an Apollo XP95 compatible control panel.

APOLLO SA6700-100 

INTELLIGENT TWIN SWITCH MONITOR BUILT-IN ISOLATOR 

The intelligent dual controller provides the function of two modules in one housing. The two modules are electrically independent of each other. Each module has a DIL switch to set its own address. The intelligent controller is designed to monitor the status of one or more single-pole contacts connected by a pair of wires and report their status to an Apollo XP95 compatible control panel

APOLLO 55000-760APO  

MINI-SWITCH-MONITOR

A controller designed to monitor the status of one or more single pole contacts connected by a pair of cables and report their status to an Apollo XP95 compatible control panel.

APOLLO 55000-845  

ZONE MONITOR

Controller for 1 zone conventional detectors with built-in isolator. The controller powers and controls the operation of a zone with up to 20 Apollo Series 65 or Orbis conventional fire detectors.

APOLLO SA4700-103

INTELLIGENT MAINS SWITCHING INPUT/OUTPUT UNIT

  The switch provides a single tolerant line (CoreProtocol only) containing one or more normally open contacts connected to a pair of cables. It also provides a voltage-free relay output that can switch 230V .

APOLLO 55000-847

INPUT/OUTPUT ADDRESSABLE MODULE WITH INTEGRATED ISOLATOR

Analog addressable I/O module with one independently controllable relay output and one supervised input. It is powered by the address circuit and occupies one address. The relay output withstands 30VDC at 1A and can be used to control a variety of devices and equipment.

APOLLO SA4700-104

INTELLIGENT TWIN INPUT/OUTPUT UNIT

The analog addressable I/O module provides the function of two modules in one housing. The two modules are electrically independent of each other. Each module has a DIL switch for setting its own address. The relay outputs withstand 30VDC at 1A.

APOLLO 55000-852   SOUNDER CONTROL UNIT WITH BUILT-IN ISOLATOR

The controller controls conventional sirens in one zone, monitors their status and sends information to a compatible Apollo XP95 control panel. It is powered by the address circuit and occupies a single address.

APOLLO 55000-182

  DIN-RAIL SOUNDER CONTROLLER

The controller controls one zone of externally powered conventional sirens, monitors their status and sends information to a compatible Apollo XP95 control panel.

PRE ADDRESSED
XPERT CARDS 

Set of pre-addressed XPERT card 126 pcs

Signaline Analogue and linear fixed temperature heat detection cables for use in addressable and conventional fire alarm systems

Signaline FT-EN is a brand new linear heat detection system approved to EN54 part 28. Fixed temperature linear heat detectors detect heat build-up anywhere along their length. When any point along the cable reaches a predetermined temperature, an alarm is triggered.

Signaline HD is an analogue recoverable linear heat detector that monitors for significant temperature rise. An electronic controller connected to the cable monitors the cable condition to sense any change in temperature by continuously measuring the electrical resistance between the metal core and the screen. If the temperature change is sufficient, the controller generates an alarm.